a-spectechnics
gse-complex solutions

4.png
X
a02.jpg

Expand products catalogue

Смотреть →

Airport runway sweeper. Special vehicle is designed for cleaning of dry and wet road coatings, garbage collecting and anti-icing fluid from the surface of airfield coatings at high operating speed. Runway sweeper consists of a biaxial base chassis with a vacuum suction unit which is mounted behind the operator’s cab for vacuum cleaning of the roadway. The volume of the water tank is 2000 liters. The volume of the waste bin can be 6.8.10 m3. Additionally, as an attachment to runway sweeper are used the magnetic plate is used for collecting heavy metal and a sweeping brush. The width of the cleaning area by magnetic plate is 2500 mm. Detailed information can be provided upon Customer’s request.

Read more: Airport runway sweeper RTAS85

Смотреть →

Airport runway sweeper. Special vehicle is designed for cleaning of dry and wet coatings, garbage collecting and anti-icing fluid from the surface of airfield coatings at high operating speed. Runway sweeper consists of a biaxial base chassis with a vacuum suction unit which is mounted behind the operator’s cab for vacuum cleaning of the roadway. The volume of the water tank can be 1000 or 2000 liters upon request. The volume of the waste bin can be 6.8.10 m3. Additionally, as an attachment to runway sweeper are used two cylindrical brushes which are located in the central part of the vehicle. Special equipment is controlled from the base chassis’ cabin. Detailed information can be provided upon Customer’s request.

Read more: Airport runway sweeper RTAS85AB

Смотреть →

Runway Snow blow Sweeper. Special vehicle is designed to clean snow from the runway, aprons, and other parts of the airfield. Runway Snow blow Sweeper Model RTSP-22m COMPACT consists of a TATA DAEWOO chassis with a 4x4 wheel base, a snow plow, a center cassette brush and a rear blower. The machine is controlled by the control panel located in the driver's cabin. Temperature range from -50 to +40 0C. The front snow plow is designed for snow removal from the runway and parking places. The lower part has seven sections, covered with wear-resistant rubber. Detailed information can be provided upon Customer’s request.

Read more: Runway Snow blow Sweeper RTSP-22M

Смотреть →

Runway Reagent Spreader. The unit is designed to spray granulated reagent, as well as sand, salt, calcium chloride and prevents the road surface from icing. The vehicle is made taking into consideration the increased load, effective in cleaning the snow on runway of airfield as well as on city streets and avenues of considerable length. The body and working mechanisms have done full cycle of anti-corrosion treatment, which guarantees their reliability and durability in use, as well as comprehensive protection against climatic factors. The vehicle body is durable and reliable, made of SS400 steel, V-type with a protective coating. Rotating disk: has a rotation speed of 500 ~ 800 rotations per minute, the movement is transmitted from the hydraulic motor. The control panel is installed inside the driver's cabin. Detailed information can be provided upon Customer’s request.

Read more: Runway Reagent Spreader RTS

Request

Products.

More detailed information can be provided upon Customer’s request.